Hello,
I recently had the concierge create and the part “Mirics Msi001” - is it possible to have the schematic symbol for this part changed to more closely resemble the actual chip, to make it easier to route traces on the schematic?
It should be a square with 10 pins on each side, and have the following pinout, going counter-clockwise starting from the top pin on the west side:
West Side (top to bottom):
1 - VCC1
2 - VCC2
3 - BND3_IN
4 - BND3_INB
5 - N/C
6 - B45_IN
7 - B45_INB
8 - VCC3
9 - VHF_INB
10 - VHF_IN
South Side (left to right):
11 - OPI
12 - OPIB
13 - U/C
14 - VCC5
15 - VCC6
16 - OSC_OP
17 - DC_FB
18 - VCC7
19 - VCC8
20 - REF_IN
East Side (bottom to top):
21 - OPQB
22 - OPQ
23 - VCC9
24 - LBND_IN
25 - LBND_INB
26 - LFILT_PC
27 - CP_OUT
28 - VCO_VCC
29 - VCC10
30 - VCC11
North Side (right to left):
31 - VDDI
32 - VDD
33 - EN
34 - CLK
35 - DATA
36 - VCC12
37 - AMP1_INB
38 - AMP1_IN
39 - AMP2_INB
40 - AMP2_IN